Induro A Tripod Bedienungsanleitung PDF herunterladen

FEATURES:

Induro Tripods are available in two categories and four collections:

Aluminum Alloy Tripods

Alloy 6M

The INDURO Alloy 6M A-Series tripods are made from high quality aluminum alloy and

precisely machined to offer the quality and strength demanded by professionals. Each

leg is extruded 6000 series Aluminum with a wall thickness of 1.5mm. Each leg lock

has a specially design anti-dust and moisture seal, along with removable rubber or

stainless steel spikes (excluding A012, A013, A014 and A114).

AlloyFlex 6M

The INDURO ALLOYFLEX 6M AX-Series aluminum tripods offers a quick switch from

vertical to horizontal center column positions They are made from high quality

aluminum alloy and precisely machined to offer the quality and strength demanded by

professionals. Each leg is extruded 6000 series Aluminum with a wall thickness of

1.5mm.Each leg lock has a specially design anti-dust and moisture seal, along with

removable rubber or stainless steel spikes (excluding Ax114).

Carbon Fiber Tripods

Carbon 8X

The INDURO CARBON 8X C-Series carbon fiber tripods offers the ultimate in strength,

lightweight, fast action and reliable performance. They are made of the latest generation

of high quality 8-layer carbon fiber tubing. The C-Series is 60% stronger overall than

conventional carbon fiber tripods. Each leg lock has a specially design anti-dust and

moisture seal, along with removable rubber or stainless steel spikes.

CarbonFlex 8X

The INDURO CARBONFLEX 8X CX-Series carbon fiber tripods offers a quick switch

from vertical to horizontal center column positions They are made of the latest

generation of high quality 8-layer carbon fiber tubing. CarbonFlex 8X tripods are 60%

stronger than conventional carbon fiber tripods. Each leg lock has a specially design

anti-dust and moisture seal, along with removable rubber or stainless steel spikes.

USER NOTICE:

Your Induro Tripod has been designed for years of maintenance free use. Please follow the

guidelines below to ensure the best performance, reliability and durability expected from Induro

Gear.

1. Do not exceed the maximum specified load capacity (see product specification chart) !

2. Always ensure that leg locks are tightly engaged before mounting a camera on the tripod !

3. Do not use the tripod below temperatures of -4 F or above +158 F (-20 C / +70 C) !

0 0 0 0

4. Always clean and dry the tripod after it has been exposed to wet, dusty, sandy or salty

conditions. Your tripod is not recommended for use in salt water. Clean the tripod with amild

soap and soft cloth. Remove any dust, dirt or sand from all leg locks, leg lock threads, leg

sections and all moving parts. !

5. Do not leave the product in the sun for prolonged periods and avoid high temperature exposure

(For example in the trunk of a car or exposed to sun behind a glass window for hours) !

6. Avoid leaving the tripod unattended in areas where people could trip over the tripod and get

hurt !

7. It is recommended that any equipment (camera's etc) be removed from the tripod when

transporting the tripod.

8. For you safety, don't let your Induro tripod come in contact with any electrical power source !

IDENTIFYING TRIPOD MODEL NUMBERS:

Tripod Model Number Example:

Prefix:Carbon Fiber Leg Material

1 Digit:25mm Leg Diameter

2 Digit: Rapid Center Column

3 Digit: 3 Sections

C013C013

Leg Material

Special Feature

Leg Diameter Column Type Numbe r of leg sections

A = Alumin um

X = Flexible Positioning Column

Aluminum

1 = Rapid Column

3 = 3 section

C = Carbon Fiber

0 = 25mm

2 = Geare d Col umn

4 = 4 section

1 = 29mm

2 = 33mm

3 = 37mm

4 = 41mm

Carbon Fiber

0 = 27mm

1 = 30mm

2 = 33mm

3 = 37mm

4 = 41mm

Letter

1 Digit

2 Digit

3 Digit

Letter

SETUP:

Before using your tripod, adjust each leg section to the desired height and leg angle setting.

Ensure that the tripod is firmly resting on a level surface and mount your camera securely on the

tripod head. Always engage any safety locks on the tripod head to prevent any accidental

dismounting.

To accommodate uneven terrain, awkward shooting

situations or for low angle shooting, your Induro tripod includes a 3-position leg angle adjustment

sliding lock. Each leg can be independently adjusted by pulling the sliding leg angle lock out and

selecting one of the three step positions (24, 55 or 80 degrees). Ensure that the leg angle lock is

securely pushed back into the lock position after you have selected the desired leg angle.

Each leg section can be independently adjusted

to the desired length by turning the proper leg lock grip counter-clockwise until the leg is free to

slide in or out. Once the desired length is achieved turn the leg lock grip clock-wise until the leg

section is securely locked. Repeat this step for each leg and each section until the tripod is set

to the desired height.

Please note: To prevent any accidental damage to your gear, always remove any mounted

equipment (camera, etc) from the tripod before adjusting the leg sections.

Your Induro tripod

incorporates a reversible mounting screw that accommodates any tripod head mounting thread

(3/8 or 20 ). The tripod is factory shipped in the 3/8 mounting thread exposed. If is

becomes necessary to reverse the mounting screw to the side, loosen the locking nut

counter-clockwise (using the included wrench) until it becomes loose and unscrew the mounting

screw until it can be complete removed. Reverse the screw, so that the

hreads are in

position and screw it back into place, secure with the locking nut and wrench.

Please note: Allow enough of the screw threads to be available for maximum security when the

tripod head is mounted onto the tripod. It's recommended that at least 5 to 6 threads be exposed

for before locking the mounting screw in place.

Some tripod manufactures require additional

mounting security and provide openings on the bottom of the tripod head mounting plate to accommodate

setscrews. Your Induro tripod includes setscrews to securely mount these types of tripod heads.

Once the tripod head is screwed onto the center mounting screw (3/8” or tighten

of the three setscrews with the provided Allen wrench until there are tightly secured.

To raise or lower the

center column, turn the center locking knob counter-clockwise and set the column to the desired

position. While holding the column in position, turn the column locking knob clockwise to secure

the column in place. Don't over tighten the center column lock, as this could damage the threads.

Please note: Take special care when raising or lowering the center column, if a camera or

equipment is mounted on the tripod. Never loosen the center column lock without holding the

center column. Failure to follow these instructions could result in damaged equipment.

Your tripod offers the ability to

reverse the center column for close-up photography, copy work and for difficult to reach object.

To reverse the center column unscrew the retractable weight hook located on the bottom of the

center column. Loosen the center column locking knob and pull the center column out. Insert the

center column with the mounting plate upside down (see figure 11) and retighten the center

column locking knob securely. The center column has an anti-twist groove, be sure to line-up the

groove with the key before inserting the column back into the main casting.

Please note: Do not reverse the center column when a camera or equipment is mounted.

All Induro tripods (excluding

A012, A013, A014, A114 and AX114) include interchangeable stainless steel spiked or rubber

feet. They provide the right contact depending on the surface or terrain that the tripod will be used

in. To remove the rubber feet simply unscrew each rubber foot counter-clockwise and replace

with the provided spiked foot (see the tool kit) and secure using the included wrench. Both the

rubber and spiked feet can be stored in the tool kit pouch. The tool pouch can be clipped onto

the tripod strap ring or attached to the tripod leg with the Velcro strap on the back of the tool kit

pouch.

For quick and easy setup each leg section

(excluding the last section)

incorporates a key and groove within the leg to prevent the leg from rotating.

When additional weight is necessary to add to the

tripod for stability during windy conditions, the retractable weight hook can be used to hold a

sandbag, camera bag or any similar item. Take care not to overload the tripod with weight as this could

have a reverse effect on increasing the tripods stability

Leg Angle Adjustment: (See figure 1)

Leg Section Adjustment: (See figure 2 & 3)

Reversible 3/8 or -20 mounting screw: (See figure 4)

Mounting plate set screws: (See figure 5)

Raising and Lowering the Center Column: (See figure 6, 7, 8)

Reversible Center Column: (See figure 9, 10, 11, 12)

Interchangeable Spiked and Rubber Feet: (See figure 13)

Anti-Twist Leg Sections:

“ “

“ “ “

“

/ -20

Retractable Weight Hook: (See figure 14)

Camera Support Gear

8 Westchester Plaza, Elmsford, NY 10523

Phone: 914-347-3300 Fax: 914-347-3309

E-mail: info@indurogear.com

www.indurogear.com

4 9 9 -9 0 2

Alloy 6m Aluminum A-Series

A-013

A-014

A-113

A-114

A-213

A-214

A-313

A-314

A-413

A-414

A-016

Max.D

Min.D

1.22

1.19

1.68

1.45

2.20

1.92

2.88

2.65

3.55

3.44

0.70

2.5

4.5

515

470

575

475

650

540

720

600

770

645

325

310

360

205

1160

1210

1265

1280

1440

1445

1580

1570

1710

1705

460

1380

1435

1480

1495

1650

1655

1740

1720

1860

1865

575

013

014

113

114

213

214

313

314

413

414

1.02

1.07

1.32

1.36

1.60

1.62

2.30

2.28

2.96

2.94

530

465

585

500

640

530

720

605

770

655

345

310

360

1190

1 175

1250

1275

1405

1345

1555

1597

1680

1745

1410

1415

1465

1490

1615

1550

1805

1855

1840

2000

Max.D

Min.D

Rubber feet

spike

Thank you for making Induro your choice for professional photographic gear.

Before using this equipment please read these instructions for proper use and

the best performance.

Carbon 8x and Alloy 6m

Locking

Nut

1/4-20 + 3/8

mounting screw

allen

wrench

Carbon 8x Carbon Fiber C-Series

weight hook

Thank you for making Induro your choice for professional photographic gear.

Before using this equipment please read these instructions for proper use and

the best performance.

Carbon 8x and Alloy 6m

20“

C013C013 1

Inhaltsverzeichnis

Seite 1 - C013C013

512FEATURES:Induro Tripods are available in two categories and four collections: Aluminum Alloy Tripods Alloy 6M The INDURO Allo

Verwandte Modelle: C Tripod

Kommentare zu diesen Handbüchern

Keine Kommentare

Induro A Tripod Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Zubehör für Video Induro A Tripod herunter. Induro A Tripod User Manual Benutzerhandbuch

Inhaltsverzeichnis

Verwandte Modelle: C Tripod

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Zubehör für Video Induro A Tripod